banner
Home » Knowledge » Content
Product Categories

Quartz stone countertops after installation and acceptance of small tricks!

- Jan 16, 2019 -

With the increasing application range of quartz stone and increasing market demand, the quartz stone market is chaotic and the quality is uneven. The problems exposed are also obvious. If the quartz stone countertop is used for a period of time after installation, cracks or obvious cracks appear, and the reason for such a situation is multi-faceted. Therefore, the acceptance after installation is crucial. Whether the installation is in place is related to whether the cabinet is beautiful or not, and it is related to whether it is satisfactory in the future.

Quartz stone has become synonymous with countertops. In many countertop materials, quartz stone gradually occupied the entire countertop market with its excellent performance. Quartz stone is rich in color, smooth and dense, and has no pores comparable to natural marble. Quartz stone belongs to artificial stone plate, which can be used in a large area without color difference, and has certain plasticity compared with natural stone. With the continuous improvement of the production capacity and technology of quartz stone manufacturers in China, quartz stone has been used more on the ground and indoor walls.

Quartz stone cabinet countertop acceptance standard

1. Chromatic aberration: Quartz stone of the same model color will have a certain degree of chromatic aberration due to different factory time. Everyone must pay attention to the comparison when entering the table.

2, flatness: After the table is installed, be sure to check the flatness with a level.

3, seam: If the table top is installed, you can clearly see the glue line of the joint, or you can feel the obvious wrong seam by hand, indicating that the seam is definitely not done.

4. Opening: The position of the sink and the cooker on the countertop needs to be opened. The edge of the opening should be round and not jagged; the four corners must have a certain curvature, which cannot be a simple right angle, and must be specially reinforced. It is best to avoid selecting on-site openings.

5, the rear water: in order to prevent the water from the countertop to the back of the cabinet, so the countertop against the wall, must be turned up to form a water retaining. It should be noted that this upturn must have a smooth arc upturn, but not a right angle upturn, otherwise it will leave a dead corner that is difficult to clean.