banner
Home » Knowledge » Content
Product Categories

4 points of attention when processing quartz stone countertops

- Aug 27, 2018 -

4 points of attention when processing quartz stone countertops


Kitchen and stove use quartz stone is more popular

However, improper installation will affect the appearance of the countertop, and it will be the root cause of post-sale problems such as cracking of the countertop.

In order to ensure the installation quality of the countertop, before the installation, Xiaobian will give you a few tricks...

1. Quartz stone plane stitching

When the quartz stone plane is spliced, attention should be paid to the physical properties of the quartz stone to avoid the consequences of joint cracking caused by thermal expansion and contraction or stress concentration;

When selecting the connection position, the force of the plate must be fully considered to avoid the connection at the corner or the furnace mouth.

 2. Quartz stone countertop corner

In the corner of the quartz stone countertop, be careful not to cause cracking at the corner of the countertop;

Dongyang Sheng quartz stone cabinet application

Therefore, in the processing of quartz stone countertops, the arc angle should be maintained at all corners with a radius of 2.5 cm or more.

3. When determining the quartz stone hole position

The opening position of the table top needs to be greater than or equal to 8 cm from the edge of the table to prevent cracking of the face of the table;

When opening the stove top, first use a cutting machine or a jig saw to open the hole, and then use a boring machine or a hand grinder to polish the trimming to achieve a smooth effect. The corner radius of the four corners is basically uniform, due to the jig saw and the cutting machine opening;

If the periphery of the cut hole is sawtoothed to have cracks remaining, it is easy to cause cracking at the opening.

4. Quartz stone countertop corner

The corners of the quartz stone countertop openings shall be rounded at a radius of 2.5 cm or more, and the four corners shall be reinforced with homogenous plate plates;

There must be a certain space between the cooktop and the countertop. The space distance is 0.4-0.6 cm. Heat-insulating cloth and tin-platinum paper are added around the opening for heat insulation protection measures.